Team Associated RC8B3e - 2018 SM 4 - Race starting setup
Run data
Run info
| Date | 2018-09-01 |
| Track | Vaasa, Finland (2017) |
| Laps | 10 |
| Total time | 5:27.447 |
| Best lap | 32.097 |
| Avg lap | 32.745 |
| Top 10 Avg | 32.745 |
| Std Dev | 0.503 |
Front tires
| Type | JConcepts Reflex |
| Compound | Black |
| Insert | STD |
| Wheel | AE |
Rear tires
| Type | JConcepts Reflex |
| Compound | Black |
| Insert | STD |
| Wheel | AE |
Conditions
| Temperature | 13.2 °C |
| Relative Humidity | 87 % |
| Wind speed | 2.18 m/s |
| Track condition | Bumpy, Damp, Smooth |
| Weather summary | Partly cloudy |
| Grip level | Medium-Low |
Front End
| Parameter | Value |
|---|---|
| Ackermann position | 4 |
| Anti-Roll Bar gap | 2.5 mm |
| Anti-Roll Bar type | 2.3mm (Black) |
| Arm Mount A | Center |
| Arm Mount B | Center |
| Arm type | B3 |
| Ball Shim Lower | 0 mm |
| Ball Shim Upper | 1.1 mm |
| Block type A | |
| Block type B | |
| Bumpsteer Washer | 0 mm |
| Camber | 2.5 deg |
| Caster Shim Front | 3 mm |
| Droop | 105 mm |
| Front ball type | Alu |
| Ride Height | 26.5 mm |
| Shock cap | Bleeder |
| Shock mounting lower | Outside |
| Shock mounting upper | 3 |
| Shock oil | AE 35W |
| Shock piston | 8 x 1.2, tapered |
| Shock rebound | 0 % |
| Shock Spring | AE Grey V1 |
| Shock tower | Carbon |
| Steering plate | 0 |
| Toe in | 0 ° |
| Upper arm mount (Front) | Lower center |
| Upper arm mount (Rear) | Center |
| Wheelbase Shim | 0 mm |
Rear End
| Parameter | Value |
|---|---|
| Anti-Roll Bar gap | 0 mm |
| Anti-Roll Bar type | 2.5mm (White) |
| Arm Mount C | Center |
| Arm Mount D | Lower center |
| Arm type | B3.1 |
| Block type C | HRC |
| Block type D | HRC |
| Camber | -1 ° |
| Camber link inside height | Middle |
| Camber link inside location | Inside |
| Camber link outside location | B (Outside) |
| Droop | 120 mm |
| Hub height | Lower hole |
| Hub shim | 1 mm |
| Ride Height | 28 mm |
| Shock cap | Bleeder |
| Shock mounting lower | Outside |
| Shock oil | 35W |
| Shock piston | 8 x 1.2, tapered |
| Shock rebound | 0 mm |
| Shock Spring | AE Grey V1 |
| Shock tower | Carbon |
| Shock upper mounting | 3 |
| Wheelbase Shim | 1 mm |
Chassis
| Parameter | Value |
|---|---|
| Battery placement | Front |
| Bodyshell | JC |
| Brace Front | Long |
| Brace Rear | Short |
| Car weight | 3590 g |
| Chassis weights | None |
| Servo saver gap | mm |
| Wing gap to tower | mm |
| Wing height | Low |
| Wing type | JC Finnisher |
Drivetrain
| Parameter | Value |
|---|---|
| Center diff setting | 10000 cSt |
| Center differential type | HTC |
| Drive shaft front | CVA |
| Drive shaft rear | CVA |
| Front diff ratio | |
| Front diff setting | 7000 cSt |
| Front differential type | HTC |
| Pinion | 17 Tooth |
| Rear diff ratio | |
| Rear diff setting | 3000 cSt |
| Rear differential type | HTC |
| Spur gear | 46 Tooth |
Electronics
| Parameter | Value |
|---|---|
| Batteries | Reedy 5800 |
| EPA Brake | 100 % |
| EPA Steering left | 100 % |
| EPA Steering right | 100 % |
| EPA Throttle | 100 % |
| ESC | Reedy 850R |
| ESC setting | Drag brake 2%, Brake punch 1, Throttle punch 2 |
| Expo Brake | 0 % |
| Expo Steering | 0 % |
| Expo Throttle | -13 % |
| Motor | Reedy Sonic 866 2100kV |
| Motor timing | 0 ° |
| Radio | Sanwa M12 |
| Steering Servo | Reedy RS1206 |
General
| Parameter | Value |
|---|---|
| Setup Notes | Pivot balls alu, Titanium screws, alu outdrives, alu steering posts |